[. . . ] For charging the batteries, only use a charger which is recommended by the manufacturer and never use the recommended charger to charge other electrical equipment. Any machines and batteries that are not being used should be kept separately in a dry place that is high up or locked, out of the reach of children. For safety's sake, a battery charger connected to the mains should also be permanently supervised. Do not place the battery on radiators or expose to strong sun rays for a longer time; temperatures over 50 °C cause damage. [. . . ] - If the eyes are affected, rinse with clear water with at least 10 minutes. Before connecting the charger to the mains, please check that the voltage of your mains connection corresponds to the voltage stated on the name plate of the charger. Ensure that the connection between the battery charger and battery is correctly positioned and is not obstructed by foreign bodies. Keep battery charger slot free of foreign objects and protect against dirt and humidity. When the battery is outside the battery charger, cover battery terminals to avoid short circuits from metal objects. When drilling or screwing in walls, they must be checked for hidden electric cables or water and gas pipes with a detector. Damaged cables must be replaced immediately by one of our service depots. Wear protective glasses, hearing protection, protective gloves and steady shoes. Therefore, always take a secure stand and hold the machine firmly with both hands. Chuck Accessories illustrated or described are not always included as standard delivery items. Motor No load speed Hammer blows (under load) Impact energy Drill dia. For precision working with metal and wood, place the machine in a drill stand (accessory). For hammer drilling, work only with protective glasses, hearing protection and the auxiliary handle. Check before putting into operation if the shift knob is latched in the position. INSERTING TOOLS Before all work on the machine itself, always set the rotational direction switch to the middle position. For drilling work in metal, wood and plastic with drills that have normal shafts, a drill chuck (13 mm max. All common drill chucks with 1/2" X 20 UNF internal threads (13 mm max. Remove the load from the machine immediately by pulling back the drilling tool. Always hold the machine tightly with both hands and assume a secure stance. Before all work on the machine itself, always set the rotational direction switch to the middle position. clean the threads of the drill chuck (accessory) and the adapter (see accessory). Screw the drill chuck onto the adapter and tighten the adapter in the tool holder the same as a drill. [. . . ] Before all work on the machine itself, always set the rotational direction switch to the middle position. Wipe off the accessible plastic parts regularly with a cloth without cleaning agent. Check the area to worked with a metal detector, for example, before starting. Ännu bättre är att ansluta batteriet till laddaren: denna övergår automatiskt till serviceläge då batteriet är helt urladdat. [. . . ]